Did you know that one in five cell phone users has dropped his or her mobile device into the toilet? Chances are high that even if yours doesn’t slip into the pool, shower, or bathtub might cause your phone to get wet. Read on for 6 tips that will teach you how to fix a water damaged phone. That way, if and when it happens to you, you’ll know exactly what to do.
How to Fix a Water Damaged Phone
Before we list the remaining tips on how to dry out a phone, memorize these don’ts. Follow these rules to prevent further damage to your phone and increase your chances of fixing your device.
1. What Not to do
Do not turn it on. It’s tempting to check to see if it’s fixed, but don’t do it. Do not try to charge your phone. This protects your charger from becoming damaged as well. Do not press any buttons or keys. You could be pushing water deeper into the mobile device. Do not shake the phone or hit it against a hard edge. Again, you don’t want to spread the water damage. Do not blow on the phone. This could also send water to other internal parts that are not wet and make your job harder. Never use a blow dryer or an oven to try to dry the device. The heat would damage the electronic parts inside. Don’t even consider it.
2. Cut the Power
The first thing you need to do is cut the power to the device. Turn off the device. This will prevent an irreversible short circuit. Next, take out the SIM and microSD cards from the phone. If you can, take out the battery as well. Some models do not allow you to remove the battery. But if you can, do so as quickly as possible.
3. Dry the Phone
Take a clean cloth or paper towel and dab the device to dry it. Make sure you are not spreading the liquid. Dab each section of the phone with a dry part of your towel to soak up as much moisture as you can. You can use a vacuum to suck out water from tiny cracks that the towel can’t reach. Make sure all the cards and the battery is out first.
4. Use a Bag of Rice
Fill a ziplock bag with uncooked rice. Rice naturally absorbs liquids. By placing your phone in a bag full of rice, it can dry out your device over time. Wrap your device in a paper towel before dropping it into the rice if it is extremely wet. Otherwise, the rice could begin to soften and get stuck in small parts of your phone. Pro tip: you know all those tiny desiccant packets that come with your new shoes or wallet?
Start stockpiling those in case your phone ever gets wet. Cut the packet open and drop ’em into a plastic or glass container with an air-tight seal. After a while of collecting, you’ll have a wet phone rescue pack ready to go. You can also purchase synthetic desiccant to have on hand, just in case. This avoids the problems with potential mushy rice. The Bheestie Bag and Dry-All are products you can buy and keep with you just in case. After a couple of days, take out the phone from the rice bag, insert the battery into the phone and switch the phone on.
5. Wait a Few Days
We know it’s incredibly difficult to be patient, but you must. The rice pack can take up to 72 hours to work. Do not take the phone out before then to check it’s progress. For now, pop your sim card into an old phone you have lying around in a drawer and wait.
6. Charge Your Phone
Once you’ve waited the right amount of time for your phone to dry, try to power it up. If it works, excellent! Next, play some music to see if the speaker got wet. If not, put it to charge. If your device is not taking the charge, the battery might be damaged. Try inserting a replacement battery to see if this is the issue. Still no luck? Compare mobile repair services to find the best price.
The Bottom Line
To wrap up, remember that doing certain things to a wet phone can cause more damage than the water! The most important thing is to act quickly and be patient. If you follow these tips, you have a good chance of being able to save your phone from a watery grave. Now that you know how to fix a water damaged phone, read up on how to clean your smartphone inside and out.